出版社： 中国电力出版社
出版日期： 2005-06-01
Contents
Foreword
1 Scope
2 Normative References
3 Type Establishment
4 Structure
5 Technical Requirements
5.1 General Provisions
5.2 Whole Machine Property Index
5.3 Principal Part of Machine
5.4 Electrical System
5.5 Noise
6 Test Rules
6.1 Delivery Inspection
6.2 Transportation Inspection
6.3 Installation Inspection
7 Packing, Marking, Storing and Transporting
7.1 Packing
7.2 Marking
7.3 Storing
7.4 Transporting
8 Installation
8.1 Drawings
8.2 Installation of Main Machine Body
8.3 Electrical Installation
9 Test
9.1 Test and Trial Run during Formation Process of Products
9.2 Whole Machine Performance Test of Products
9.3 Retest of Whole-machine Performance
10 Acceptance Regulations
Annex A (Normative) Correction Method and Efficiency Judgment of the Separation Efficiency of Electric Precipitator
1 Scope
This standard specifies the type, whole-machine property index, manufacture requirements, test rules, packing, marking, storing and transporting, installation, test method, and acceptance of electric precipitator, as well as the conformity decision method of products.
This standard mainly is applicable to the design, manufacture, installation, debugging and acceptance of horizontal electric precipitator. The vertical electric precipitator may be implemented by making reference thereto. It is not applicable to the purification of flammable and explosive gases.
2 Normative References
The following normative documents contain provisions which, through reference in this code, constitute provisions of this code. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB/T 1184 "Geometrical Tolerancing--Geometrical Tolerance for Features without Individual Tolerance Indications"
GB/T 1804 "General Tolerances--Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications"
GB/T 13931 "Methods of Performance Tests for Electrostatic Precipitators"
DL/T 461 "Guide for Operation, Maintenance and Management of Electrostatic Precipitators for Coal-fired Power Plants"
DL/T 678 "General Welding Procedure Specification for Structural Steel of Power Station"
DL/T 5031 "The Code of Erection and Acceptance for Power Plant Construction-- Piping Section"
DL/T 5047 "The Code of Erection and Acceptance for Power Plant Construction-- Section of Steam Boiler Set"
JB/T 6746.1 "Porcelain Insulators for Electrostatic precipitator-- Porcelain Busing"
JB/T 6746.2 "Porcelain Insulators for Electrostatic Precipitator-Ceramic Revolving Axles"
JB/T 6746.4 "Porcelain Insulators for Electric Precipitator--Wall Bushing"
JB/T 9688 "Rectifying Equipment for High Voltage Electrostatic Precipitator"
Oz Free Online Home |
Cars |
Real Estate |
Classifieds |
Jobs | Marine | RV | Display Houses
